NT-S200P85V2
NT-S200P85V2 lists 5 kN, positioning stud NT-S200P25C1, compensating stud NT-S200P25C2, clamping stud NT-S200P25C3, and 3.4 kg.
Sensor zero-point module
Sensor Zero-Point Module
Three published sensor rows
The catalogue block Sensor Zero Point Clamping System names three rows. NT-S200P85V2 lists 5 kN and 3.4 kg. NT-S200P115V2 lists 10 kN and 5.4 kg. NT-S200P148V2 lists 18 kN and 6.9 kg. Each row names a positioning stud, a compensating stud, and a clamping stud. The shared sensor block lists detection 0 - 0.56 mm and supply 10 - 30 V.
5 kN / 10 kN / 18 kNCatalogue clamping force. The first row lists the lower figure.
0 - 0.56 mm detection distanceShared sensor block on the same catalogue page. It is not a separate item number.
DC 10 - 30 VSupply voltage on the shared sensor block.
Standard models in stock
Custom hole patterns
HMC / VMC / 4th / 5th axis
Quality documents scoped at RFQ
MIC Audited Supplier
Product overview
Three published sensor rows
Use this page when the drawing names one of these three item numbers. Match the item number before you order the module.
NT-S200P115V2
NT-S200P115V2 lists 10 kN, positioning stud NT-S200P30C1, compensating stud NT-S200P30C2, clamping stud NT-S200P30C3, and 5.4 kg.
NT-S200P148V2
NT-S200P148V2 lists 18 kN, positioning stud NT-S200P35C1, compensating stud NT-S200P35C2, clamping stud NT-S200P35C3, and 6.9 kg.
Shared sensor block
Polarity is NPN or PNP and is selectable. Detection distance is 0 - 0.56 mm. Supply voltage is DC 10 - 30 V. Response frequency is 5 kHz. Current consumption is 10 mA or less. Open and close capacity is an open collector at 50 mA or less. Protective structure is IEC specification IP67.
Published catalogue rows
Compare the three published rows
These values are the 2026 NEXTAS quick-change catalogue text for the three named models. They do not replace the approved drawing.
| Item | Clamping force | Positioning stud | Compensating stud | Clamping stud | Weight |
|---|---|---|---|---|---|
| NT-S200P85V2 | 5 kN | NT-S200P25C1 | NT-S200P25C2 | NT-S200P25C3 | 3.4 kg |
| NT-S200P115V2 | 10 kN | NT-S200P30C1 | NT-S200P30C2 | NT-S200P30C3 | 5.4 kg |
| NT-S200P148V2 | 18 kN | NT-S200P35C1 | NT-S200P35C2 | NT-S200P35C3 | 6.9 kg |
Published dimension columns
The same page lists φD1, φD2, H1, H2, M, and φS in a text table. This page copies those columns and does not add drawing callouts.
| Item | φD1 | φD2 | H1 | H2 | M | φS |
|---|---|---|---|---|---|---|
| NT-S200P85V2 | 110 mm | 85 mm | 55 mm | 46 mm | M6 | 97 mm |
| NT-S200P115V2 | 140 mm | 115 mm | 63 mm | 51 mm | M8 | 131 mm |
| NT-S200P148V2 | 185 mm | 148 mm | 76 mm | 61 mm | M10 | 164 mm |
Selection and mounting
Match the row to its three studs
- Order the three studs named on the row. NT-S200P85V2 names NT-S200P25C1, NT-S200P25C2, and NT-S200P25C3.
- NT-S200P115V2 names NT-S200P30C1, NT-S200P30C2, and NT-S200P30C3. NT-S200P148V2 names NT-S200P35C1, NT-S200P35C2, and NT-S200P35C3.
- The dimension table lists φD1, φD2, H1, H2, M, and φS beside the same item numbers.
- This catalogue block does not list repeatability or an unlocking method. Confirm both on the selected drawing.
- The weight column sits on the force row. It is not a lift load.
- Exposed cable: robotic folding resistant highly flexible cables. The protection circuit lists power reverse connection protection, surge absorption, load short circuit protection, and output reverse connection protection.
Applications
Where this sensor module is used
Robot-mounted series
The catalogue places this block in the robot-mounted zero-point tool changer series.
Three studs
Use the positioning, compensating, and clamping studs named on the selected row. Do not mix those item numbers across rows.
Sensor cable
Polarity is NPN or PNP and is selectable. The cable line says robotic folding resistant highly flexible cables.
Flat plates
The manual clamping plate is a separate page. Do not substitute a plate item number for one of these modules.
Frequently Asked Questions
Which item numbers are published here?
NT-S200P85V2, NT-S200P115V2, and NT-S200P148V2.
What studs does each row name?
A positioning stud, a compensating stud, and a clamping stud. NT-S200P85V2 names NT-S200P25C1, NT-S200P25C2, and NT-S200P25C3.
Does this page list repeatability?
This catalogue block does not list repeatability or an unlocking method. Confirm both on the selected drawing.
Which sensor figures are in the text block?
Detection distance 0 - 0.56 mm, supply voltage DC 10 - 30 V, response frequency 5 kHz, current consumption 10 mA or less, open collector 50 mA or less, and IEC specification IP67.
How do I request a quote?
Send the item number, the machine interface, and the quantity. The reply confirms the catalogue row after the drawing is reviewed.
Fast quote
Request a sensor zero-point module quote
Name, work email, the machine interface, and the item number are enough to start. The reply confirms the catalogue row after the drawing is reviewed.