P125 Right-Angle
NT-S52P125V3 lists 20 kN, pull stud NT-S52P16V1, Manual unlocking, and 14.2 kg.
Right-angle zero-point plate
Right-Angle Zero-Point Plate
Two published right-angle rows
The catalogue names two right-angle rows. NT-S52P125V3 is P125 Right-Angle: 20 kN, pull stud NT-S52P16V1, and 14.2 kg. NT-S96P192V5 is P192 Right-Angle: 30 kN, pull stud NT-S96P20V1, and 41.3 kg. Both rows are Manual, in hardened stainless steel, with 4 × 90° indexing and repeat positioning of <0.005 mm.
20 kN / 30 kNCatalogue clamping force. The P125 row lists the lower figure.
<0.005 mm repeat positioningCatalogue repeat positioning on both published rows. Confirm seating on the drawing and on the machine.
Hardened stainless steelThe material line on both catalogue rows.
Standard models in stock
Custom hole patterns
HMC / VMC / 4th / 5th axis
Quality documents scoped at RFQ
MIC Audited Supplier
Product overview
Two published right-angle rows
Use this page when the drawing names a right-angle row. Match the item number before you order the plate.
P192 Right-Angle
NT-S96P192V5 lists 30 kN, pull stud NT-S96P20V1, Manual unlocking, and 41.3 kg.
Shared features
Hardened stainless steel, 4 × 90° indexing, and repeat positioning of <0.005 mm.
Drawing envelope
Footprint and height are on the catalogue drawing. This page does not copy those callouts.
Published catalogue rows
Compare the two published rows
These values are the 2026 NEXTAS quick-change catalogue text for the two named models. They do not replace the approved drawing.
| Item | Catalogue name | Clamping force | Pull stud | Weight |
|---|---|---|---|---|
| NT-S52P125V3 | P125 Right-Angle | 20 kN | NT-S52P16V1 | 14.2 kg |
| NT-S96P192V5 | P192 Right-Angle | 30 kN | NT-S96P20V1 | 41.3 kg |
Selection and mounting
Match the row to the pull stud
- Choose NT-S52P125V3 only when the vise or fixture uses pull stud NT-S52P16V1. The row lists 20 kN and 14.2 kg.
- Choose NT-S96P192V5 only when the vise or fixture uses pull stud NT-S96P20V1. The row lists 30 kN and 41.3 kg. The stud named on the other row does not lock in this seat.
- The zero-point plate page keeps the flat plate rows. This page lists the two right-angle rows.
- Footprint and height stay on the catalogue drawing. Confirm them there before you release the job.
Applications
Where a right-angle row is used
P125 setup
A right-angle row when the fixture uses NT-S52P16V1 and the drawing names NT-S52P125V3.
P192 setup
A right-angle row when the fixture uses NT-S96P20V1 and the drawing names NT-S96P192V5.
Pull stud
Order the stud the row names. The pull stud page lists NT-S52P16V1 and NT-S96P20V1.
Flat plates
Square, round, riser, and combination rows are separate pages. Do not substitute one of those item numbers for a right-angle row.
Frequently Asked Questions
What clamping force does each row list?
NT-S52P125V3 lists 20 kN. NT-S96P192V5 lists 30 kN. Both figures are catalogue clamping force.
Which pull stud does each row name?
NT-S52P125V3 names NT-S52P16V1. NT-S96P192V5 names NT-S96P20V1.
What weight does the catalogue list?
NT-S52P125V3 lists 14.2 kg. NT-S96P192V5 lists 41.3 kg.
Where are the footprint and the height?
Footprint and height are on the catalogue drawing. The text table lists the item, the clamping force, the unlocking method, the pull stud, and the weight.
What should I send for a quote?
The machine table, the item number, the vise or fixture with its pull stud, and the quantity.
Fast quote
Request a right-angle zero-point plate quote
Name, work email, the machine table, and the item number are enough to start. The reply confirms the catalogue row after the drawing is reviewed.